Netgear N150

[Yelvieman]

Hi
I've been playing with my Pi for a couple of days and in general I'm quite happy with it so I went out and bought a few extra bits for it - all from the Wiki list of approved hardware.

The keyboard and USB hub are working fine but I can't get the N150 wifi adaptor to work. I've been following Omer's guide and Neil Smith's comments but when I run dmesg I get

usb 1-1.2.4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
usb 1-1.2.4: Service connection timeout for: 256
ath9k_htc 1-1.2.4:1.0: ath9k_htc: Unable to initialize HTC services
Failed to initialize the device
ath9k_htc: probe of 1-1.2.4:1.0 failed with error -22
usbcore: registered new interface driver ath9k_htc

when plugged in to the hub or
usb 1-1.3: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
ath9k_htc 1-1.3:1.0: ath9k_htc: Target is unresponsive
Failed to initialize the device
ath9k_htc: probe of 1-1.3:1.0 failed with error -22

when plugged into the Pi.

I've tried leaving it in and doing a sudo reboot, doing a sudo reboot without it plugged in all with no luck.

Any advice would be gratefully received.

Thanks.

[GS7]

Hi, can't offer any help I'm afraid, but look forward to seeing if you manage to get this working as I was going to buy one of the Netgear N150's for when my pi arrives too.

Alan

[Yelvieman]

See my other thread - it does work just not if you want anything other than an old keyboard plugged in!

[ginggs]

See my other thread - it does work just not if you want anything other than an old keyboard plugged in!

Link please?

I'm seeing this same error with a D-Link DWA-126 wireless USB adapter. I am trying to power the Pi, DWA-126, keyboard and mouse from the same USB hub though.

[Dweeber]

When I see Netgear N150, I think router, not USB WiFi adapter. Big difference in price.