Go to advanced search

by bricolodu13
Mon Dec 21, 2020 10:11 pm
Forum: Networking and servers
Topic: Simple Network Share
Replies: 3
Views: 290

Re: Simple Network Share

you can use Samba client
by bricolodu13
Thu Dec 17, 2020 2:28 pm
Forum: Networking and servers
Topic: Zerotier and web interface mirroring for ubiquitous access
Replies: 0
Views: 192

Zerotier and web interface mirroring for ubiquitous access

Hello eveyone, First of all, I would like to appologize for my ignorance into that subject... I have installed ZeroTier on a Pi refered as My Pi that act as an in Home IP controlled File Server. (ip:1742) I also have installed ZeroTier on a mobile Windows PC and Android phone so that my PC and/or my...
by bricolodu13
Sat Jun 13, 2020 8:00 am
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread. [I2S works]
Replies: 1032
Views: 647902

Re: STICKY: The I2S sound thread. [I2S works]

Thank you phofman, this is it ! 8-)

Still, now, I would like to be able to resync in slave mode at the Max Frequency supported by my DAC , that is 352800KHz

Does any one know a ready to use driver ?
by bricolodu13
Fri Jun 12, 2020 7:28 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread. [I2S works]
Replies: 1032
Views: 647902

Re: STICKY: The I2S sound thread. [I2S works]

Hello HiassofT, No, that's not possible. The available formats and samplerates are determined by what the I2S controller and the codec support (only formats/rates supported by both of them will be available). Thank you for your answer. I have Three more questions: 1/ Does anyone know of a ready to u...
by bricolodu13
Tue Jun 09, 2020 8:25 am
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread. [I2S works]
Replies: 1032
Views: 647902

Re: STICKY: The I2S sound thread. [I2S works]

Let me ask similar relatedquestion :

Is it possible to indicate somehow a frequency limit inside the dts.

88K2, 192K, 384K.

Thank you for your help
by bricolodu13
Mon Jun 08, 2020 1:40 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread. [I2S works]
Replies: 1032
Views: 647902

Re: STICKY: The I2S sound thread. [I2S works]

Hello, I have tried to slave the Pi to an external Clock running at 11.289600 ‬MHz for a 352,800KHz audio file I tried to specify the external Clock limit but, the way I did, It failled and stuck to 188,4KHz files limit (with the corresponding clock) in Slave mode. PS: I'm making the WS with integer...
by bricolodu13
Mon Jul 15, 2019 8:23 am
Forum: Troubleshooting
Topic: SSH Stop working : Network error connection refused
Replies: 6
Views: 960

Re: SSH Stop working : Network error connection refused

Thank you for removing the Stiky message and sorry for the inconvenience. The fact is that in the meantime I did a fresh Raspbian install and did not get any issue. So, that's a problem with dietpi, however It looks like I'm the only person experimenting such a weird behaviour as Igot no answer from...
by bricolodu13
Sun Jul 14, 2019 12:12 pm
Forum: Troubleshooting
Topic: SSH Stop working : Network error connection refused
Replies: 6
Views: 960

SSH Stop working : Network error connection refused

Hello I have a VERY WEIRD problem with ssh connection to different Raspberry Pi running dietpi headless and serial connection not enabled => Network error connection refused I'm running the latest Dietpi version V6.25 I have 3 Raspberry Pi (1x Rpi 3b+ and 2x Rpi 3a+) I have 3 Windows PC (2 Windows 1...
by bricolodu13
Wed Jul 10, 2019 11:15 am
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread. [I2S works]
Replies: 1032
Views: 647902

Re: STICKY: The I2S sound thread.

Hi Hias, It's working now. I had an old asound.conf that was on the way, sorry :oops: ! I finally got it working with my yesterday code: codec_port: port { codec_endpoint: endpoint { remote-endpoint = <&cpu_endpoint>; bitclock-master; frame-master; }; Thank you very much for your help.
by bricolodu13
Tue Jul 09, 2019 11:24 am
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread. [I2S works]
Replies: 1032
Views: 647902

Re: STICKY: The I2S sound thread.

Hi Hias/all I got your point 8-) Howerver, I still can't get any music ! At best I have weird noise. Here is what I did. 1/ Enter the bit clock and the LRCK to the Pi with the following /dts-v1/; /plugin/; / { fragment@0 { target = <&i2s>; __overlay__ { #sound-dai-cells = <0>; status = "oka...
by bricolodu13
Mon Jul 08, 2019 3:06 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread. [I2S works]
Replies: 1032
Views: 647902

Re: STICKY: The I2S sound thread.

Hello, I'm trying to slave my Pi and my DAC to an external Clock I'm using a RPi 3B+ with Dietpi 4.19.42-v7+ As a DAC, im using the Adafruit MAX98357 I2S Class-D Mono Amp As an external clock, I'm using the Adafruit Si5351 Clock Generator Breakout I get music without issue when the Amp is connected ...
by bricolodu13
Sat Jun 22, 2019 6:42 pm
Forum: Troubleshooting
Topic: Connect Raspi to a Proxy
Replies: 22
Views: 153680

Re: Connect Raspi to a Proxy

Hello The community :D ! I have a Pi 3B+ and a Zero W that both can wirelessly connect to a proxy : Fine Both can ping Google, both can do apt-get update : Fine BUT : I have on these Pi LogitechMediaServer that is running and none of my Pi can connect to any internet Radio or Streaming plateform fro...
by bricolodu13
Thu Aug 02, 2018 6:44 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread. [I2S works]
Replies: 1032
Views: 647902

Re: STICKY: The I2S sound thread.

Hello Hias, Once again I'm back with this Right justified affair. Although I made some progress with a hardware double shif register (2x X7), I still prefer to try to make everything working from the driver. I think I'm almost done with your driver. First of all, I had to add "dai-tdm-slot-num ...
by bricolodu13
Thu May 17, 2018 1:44 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread. [I2S works]
Replies: 1032
Views: 647902

Re: STICKY: The I2S sound thread.

Hello Helias, Today I tried again, because in the mean time, I have received the 74HCT164 a shift register that I had ordered. So here is the situation : 1/ with the I2S driver (hifiberry_dac) -> TDA1543A Sound is ok up to 30% software volume, it is around the 100% volume 2/ with the right justified...
by bricolodu13
Tue May 08, 2018 3:57 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread. [I2S works]
Replies: 1032
Views: 647902

Re: STICKY: The I2S sound thread.

Hello Helias, Thank you very much for your help. However, I stil get the same bad sound, unfortunately ! I also tried again squeezelite ~/squeezelite $ ./squeezelite -o sysdefault:CARD=GenericRJ -a 20:4:16:1 -s 192.168.1.13 "16" in -a 20:4:16:1 means force 16 bits With Squeezelite I get a ...
by bricolodu13
Tue May 08, 2018 9:17 am
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread. [I2S works]
Replies: 1032
Views: 647902

Re: STICKY: The I2S sound thread.

Hello Hias, Thank you for trying to sort this out with me ! I checked again, and yes I was forcing the file to 16bits. I also tried with aplay, as I can monitor what is going on : :pi@raspberrypi:~ $ sudo aplay -vv -f cdr test.wav Warning: format is changed to S16_LE Playing WAVE 'test.wav' : Signed...
by bricolodu13
Fri May 04, 2018 4:19 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread. [I2S works]
Replies: 1032
Views: 647902

Re: STICKY: The I2S sound thread.

Hello Hias, I'm back with my TDA1543A. I finally got some time to spent today to try to get correct sound out of it, but failled to do so ! :oops: Here is my config.tx # Enable audio (loads snd_bcm2835) #dtparam=audio=on #dtparam=i2s=on dtoverlay=0W1audio-soundcard,alsaname=0W1audio Listing soundcar...
by bricolodu13
Thu Apr 12, 2018 5:08 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread. [I2S works]
Replies: 1032
Views: 647902

Re: STICKY: The I2S sound thread.

Thank you !
by bricolodu13
Thu Apr 12, 2018 4:56 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread. [I2S works]
Replies: 1032
Views: 647902

Re: STICKY: The I2S sound thread.

Thank you Hias, Sorry I missed it! Now, I get the board listed with your code, however I didn't tested it yet with the TDA1543A. I don't understand though why you make reference to spdif as my dac is japanese format right justified. I have changed your code from left justifed to right justified, by ...
by bricolodu13
Thu Apr 12, 2018 4:49 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: PT8211 I2S ASOC driver
Replies: 14
Views: 6340

Re: PT8211 I2S ASOC driver

Thank you pvdmeer, Thank you Hias, Hias, I get the board listed with your code, however I didn't tested it yet with the TDA1543A. I don't understand though why you make reference to spdif as my dac is japanese format right justified. I have changed your code from left justifed to right justified. Be...
by bricolodu13
Thu Apr 12, 2018 4:15 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread. [I2S works]
Replies: 1032
Views: 647902

Re: STICKY: The I2S sound thread.

Hello, I'm new to all this, sorry ! I have spent a couple of hours reading and trying to build a module for my dac without success. I use a TDA1543A (right justified, Japanese format) here is my .dts // Definitions for TDA1543A-SoundCard /dts-v1/; /plugin/; / { compatible = "brcm,bcm2708";...
by bricolodu13
Wed Apr 11, 2018 6:58 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: PT8211 I2S ASOC driver
Replies: 14
Views: 6340

Re: PT8211 I2S ASOC driver

Hello pvdmeer,

I have the same need for another Japanese format DAC.

Could you post your code ?

It would help.

Thank you,
Jean
by bricolodu13
Thu Jul 27, 2017 11:13 pm
Forum: Compute Module
Topic: CM3 Availlability ?
Replies: 1
Views: 921

CM3 Availlability ?

Hello,

I plan to use CM3 for a project, however, I'm scarry about module availlability as there are no module at RS nor Farnell in France.

I may need a few thousand/year !

Should i forget about Pi ?

Best regards,
Jean
by bricolodu13
Sat Jun 11, 2016 8:06 am
Forum: Troubleshooting
Topic: Ethernet doesn't work anymore
Replies: 5
Views: 2263

Re: Ethernet doesn't work anymore

Hello, I made the usb hub working again, unfortunately it doesn't work on the pi zero. I have checked connections on the Pi usb pins, it is ok. Should I plug in my keyboard in, I can use it. Should I plug a usb soundcard, it looks like working. Should I plug the Ethernet adaptor, it also looks like ...
by bricolodu13
Fri Jun 10, 2016 10:02 pm
Forum: Troubleshooting
Topic: Ethernet doesn't work anymore
Replies: 5
Views: 2263

Re: Ethernet doesn't work anymore

Hello, I'm experimenting the exact same problem with a brand new Pi Zero. It worked out of the box with a ethernet / usb adaptator.. I then switched to a wifi dongle, it worked fine, then during the installation it losts its ethernet connection. Since then, no way to reconnect. I have flashed the OS...

Go to advanced search