Go to advanced search

by Sundar19
Sun Jan 03, 2021 6:18 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: [quick-guide] CAN bus on raspberry pi with MCP2515
Replies: 171
Views: 413692

Re: [quick-guide] CAN bus on raspberry pi with MCP2515

sinek_ wrote:
Tue Dec 29, 2020 12:16 pm
hello everyone,

i've followed every step that op satated but having some issues. "net" folder inside "spi0.0" is missing, therefore "can0" too. i'm using rpi4 with the latest os. any remedies?
Do you have spi0.1 visible?
by Sundar19
Fri Dec 25, 2020 4:09 am
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: [quick-guide] CAN bus on raspberry pi with MCP2515
Replies: 171
Views: 413692

Re: [quick-guide] CAN bus on raspberry pi with MCP2515

Hey I followed the entire quick-guide which helped a lot. For a project I'm trying to implement a CAN bus between an Arduino Nano and Raspberry pi 3b. My arduino is constantly transmitting data every 10seconds but I'm unable to receive data on my raspberry pi. I either get no output or an occasiona...
by Sundar19
Fri Dec 25, 2020 4:08 am
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: [quick-guide] CAN bus on raspberry pi with MCP2515 and Arduino
Replies: 0
Views: 19064

[quick-guide] CAN bus on raspberry pi with MCP2515 and Arduino

Hi, I am seeing many people who want to establish CAN communication between Raspberry Pi and Arduino and that made me post the solution here . VERY IMPORTANT NOTE: 1.Most of my steps are from https://www.raspberrypi.org/forums/viewtopic.php?t=141052 , Please check that out before coming here 2. You ...
by Sundar19
Tue Dec 08, 2020 6:04 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: [quick-guide] CAN bus on raspberry pi with MCP2515
Replies: 171
Views: 413692

Re: [quick-guide] CAN bus on raspberry pi with MCP2515

Thank you very much for sharing, all your steps work properly in my case. If anyone trying the system like: PI3 -- MCP2515---MCP2515---Arduino Uno, the following information would help. 1. Saper_2 was totally right on modifying the power supplying wires. because TJA1050 requires minimum 4.78V. Inst...
by Sundar19
Mon Dec 07, 2020 5:05 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: [quick-guide] CAN bus on raspberry pi with MCP2515
Replies: 171
Views: 413692

Re: [quick-guide] CAN bus on raspberry pi with MCP2515

Hi,
I followed all the above . But any idea how to connect RPi 2<==> mcp2515 <==> mcp2515 <==> arduino uno
I tried connecting other end with arduino but I am unsuccessful at it! if anyone already tried it out please let me know!!
Thanks

Go to advanced search