sim7600

arazak4u

I've purchased SIM7600 based 4G hat board, however I'm unable to use as modem.. so hoping for a little assistance, or peoples suggestions.

ADAchim

Hey, I want to connect a waveshare sim7600 HAT to my Pi. While I tested on windows, the module started the cellular connection automatically with the provided windows drivers. Since there are no such drivers for Linux, I wanted to ask if someone ...

Sra1

... The below link explains the procedure to connect the Raspberry Pi to the internet, using a 4G HAT Board. https://www.hackster.io/ParryTechnology/sim7600-4g-lte-raspberry-pi-hat-c3cd4d Thanks, Sravan

topguy

... a 3G/4G "hat" for the Raspberry should not need to use the USB and I have never seen one need USB either. https://www.waveshare.com/sim7600g-h-4g-hat.htm https://www.hackster.io/ParryTechnology/sim7600-4g-lte-raspberry-pi-hat-c3cd4d

sufian

... sim module is SIM7600E-H 4g Hat For reference, here is the SIM module I'm using with raspberry pi zero W https://www.hackster.io/ParryTechnology/sim7600-4g-lte-raspberry-pi-hat-c3cd4d I'm using Vodafone & JIO sim cards and both the sims are working as expected... PS: please make sure you ...

Sleepy_Mickey

... stream too. BUT THIS GPS DOES NOT WORK. Any help from someone would be much appreciated. *Update on my recent reply* I noted the voltage that my SIM7600 is giving to the GPS antenna that was 2.8v and the antenna needed 3.3 - 5v to become operational. What I did I used a Zener diode and gave the ...

Sleepy_Mickey

I have the same issue. I've been trying for the last 17 days and still, it does not work. Bought another antenna tried checking the input voltage that is 3.3. My module is connecting to the internet and it can dial numbers giving me enough speed to stream too. BUT THIS GPS DOES NOT WORK. Any help fr...

techie90

... rather have as much power as possible dedicated to the WIFI and cell) SanDisk Extreme PRO microSDHC 32g(the 16 was out of stock :'( ) Waveshare sim7600G-H 4g hat Waveshare 6inch HD e-Paper Hat (maybe run a script to check statuses and such once it's booted up) Romoss 30,000 mAh battery pack ...

lauka

Same here, I haven't got the google AGPS server working with the SIM7600.

I someone has, please share you knowledge

.

drj_confused

... me if I still have to use additional cables to make this work. Is there a reason, why this can only work via USB? Btw. I am using the Waveshare sim7600 HAT Are there other HATs out there, which are easier to setup (and are not connected via USB). Any help is appreciated!

reggelo

Thanks, i already check it. Meanwhile i have half success (more than the nothing... :)) with ecall_audio ( https://github.com/nadsat/ecall_audio ) where i found the key how can transfer audio flow to ttyUSB4: AT+CPCMREG=1 You could try it as I if you install ecall_audio. When installed type 'iex -S ...

yoozieck

Hi everybody! I have an USB dongle variant of the SIM7600. GPS and network works well for me, but I have problem with handling the phone calls. I can make and receive calls, but can not hear anything. I have no idea how to forward the voice to the ...

reggelo

Hi everybody! I have an USB dongle variant of the SIM7600. GPS and network works well for me, but I have problem with handling the phone calls. I can make and receive calls, but can not hear anything. I have no idea how to forward the voice to the ...

dhanishvijayan

... the following blog link to use QMI based network access with Raspberry PI. https://www.elementzonline.com/blog/accessing-internet-(jio-sim)-in-sim7600-4g-modem-v2.0-with-Raspberry-pi-using-qmi-interface Even though I used the SIM7600EI module from ElementzOnline, the instructions in the Blog ...

dhanishvijayan

You can use the GSM Class from here - https://github.com/elementzonline/Raspb ... /GSM_class
This is originally written for SIM800 GSM Modem but can be easily modified for SIM7600.

The related blogs can be found at https://elementzonline.com/blog

GunganPI

... (it's set in the pijuice-gui software config utility), but also Sixfab makes hats with EEPROMs and advertise them all as stackable. I also have a SIM7600 cellular/gps hat that stacks (but this one doesn't have an EEPROM at all). That's what gave me the idea of removing the EEPROM altogether. It ...

hnazemi3

Hi all, I am having the exact same issue with my SIM7600 module. GPS works in mode 1 and 2 and as soon as I switch to mode 3 it turns off and returns CGPS: 0. This is the command I am running: AT+CGDCONT= 1,"IP","diginet","0.0.0.0",0,0 ...

www.lessand.ro

... I am deploying Rapbserry Pi on a self-driving solar powered boat (https://www.theselfdrivingboat.com) with 4G LTE access through a SIM7600 modem. I need the Pi to receive instructions to direct the boat (e.g. move forward, or go to this GPS coordinates) on a extremely tight energy ...

iznobe

Hi have you a desktop version ?

if yes , there is a very good tool to do this : network manager

just enter parameters and save with default connexion . after a reboot all will be fine .

rscd27

You can use the rc.local startup script and follow the instructions here:

http://www.ingcool.com/wiki/SIM7600CE-T ... 4G_Modules (Check the section named: Initialize RPI)

busseanlagen

... sms=$(mmcli -s ${n}) #read out last message fi Here are some links that helped me a lot: https://techship.com/faq/how-to-integrate-simcom-sim7500-sim7600-series-linux-ndis-driver-without-rebuilding-kernel/ https://techship.com/faq/using-networkmanager-and-modemmanager-in-linux-to-automatically-establish-and-maintain-a-connection/ ...

phabloshablo

Hi I have a raspberry pi4 with SIM7600E 4g Hat I don't know how to set automatically internet connection without put this series of commands when i start raspberry, Beacouse i need to have connection when i start my raspberry . Every time i start i need to open terminal and put this code 1) sudo qmi...

donegal

Hey, Did you ever manage to get A-GPS working using the AT-CGPS=1,3 command? I'm having the same issue with the Waveshare SIM7600G-H 4G HAT. I have configured as per the manual from Waveshare and have tried variations of SSL on / off, different SUPL servers, trying IP addresses instead of URL's ... ...

B.Goode

... been trying to connect to my raspberry pi thru telnet or SSH but unfortunately I've not been able to do it. the Rpi is connected thru sim modem (Sim7600) and I've got to connect to internet. i've get the IP address of my RPi and I've tried to do a telnet from my computer and the connection is ...

Varufaker

... been trying to connect to my raspberry pi thru telnet or SSH but unfortunately I've not been able to do it. the Rpi is connected thru sim modem (Sim7600) and I've got to connect to internet. i've get the IP address of my RPi and I've tried to do a telnet from my computer and the connection is ...

Search found 106 matches: sim7600

4G HAT as Modem

Sim7600G HAT on pi 4 Model B with Ubuntu 21.04 as OS

Re: Suggest 4G HAT for Raspberry PI 3

Re: LTE/4G hat with connection over gpio

Re: 4G Hat

Re: Assisted GPS (AGPS) on SIM7600 module

Re: Assisted GPS (AGPS) on SIM7600 module

Re: 4G Hat

Re: Assisted GPS (AGPS) on SIM7600 module

Re: 4G Hat

Re: 4G Hat

Re: 4G Hat

Re: 4G Hat

Re: 4G Hat

Re: Help with SIM7600 example code

Re: EEPROM ID Conflicts

Re: Assisted GPS (AGPS) on SIM7600 module

Rasberry Pi as a low energy 4G LTE Server

Re: 4g Hat (sim7600) set automatic

Re: 4g Hat (sim7600) set automatic

Re: 4G Hat

4g Hat (sim7600) set automatic

Re: Assisted GPS (AGPS) on SIM7600 module

Re: Connecting to RPI thru telnet (not LAN)

Connecting to RPI thru telnet (not LAN)