Posts: 22
Joined: Wed Jul 18, 2012 1:07 pm

Premade Gentoo Stage 4

Wed Jul 18, 2012 1:12 pm

Hey everyone

I made a minimal Gentoo stage 4 system for the Raspberry Pi, with all packages for it recompiled specifically against the Pi's CFLAGS etc

It should be a simple 'untar and boot' operation

Link to said image:

Posts: 36
Joined: Tue Jul 17, 2012 8:38 am

Re: Premade Gentoo Stage 4

Thu Jul 19, 2012 8:48 pm

I tried to use this image, but it doesn't work for me. I think I am missing something.

I had two tries with the same result -> It stops booting after recognizing my USB device (keyboard).

The only difference was that I the first try was using the special cylinder/.. partitions as recommended here . In the 2nd try I preinstalled Raspbian and formated the partitions afterwards.
On my laptop with cardreader I mounted partition 2 and copied the tar.gz to it. Than I just used

tar xvfpz raspberry.tar.gz

Then I mounted the fat partition to boot and copied the files from boot2 in it. Unmount all and tried to boot.

Posts: 22
Joined: Wed Jul 18, 2012 1:07 pm

Re: Premade Gentoo Stage 4

Fri Jul 20, 2012 10:40 am

Try letting the system boot without any USB devices connected, the Pi has known "bugs" with USB devices (keyboards especially)

Return to “Gentoo”