Hi, not sure if this counts as a problem that needs troubleshooting...
I received my pi today and I have it connected to my TV by HDMI. I also have a 3.5mm cable running from the pi into my sound system and the correct input on the sound system selected, but the sound insists on playing through the TV speakers. Do I need to change a setting somewhere so that my pi knows to use the HDMI for video, but the audio jack for the audio?
Thanks in advance,
EDIT: Oh yes, incase it matters here I'm using the latest version of Raspbian Wheezy
6 posts • Page 1 of 1
Mr Webster normally gives good advice but on this occasion I have serious doubts. I think http://www.raspberrypi.org/phpBB3/viewt ... 22#p219222 will be more useful to the OP.
Quis custodiet ipsos custodes?
- Raspberry Pi Engineer & Forum Moderator
- Posts: 6117
- Joined: Wed Aug 17, 2011 7:41 pm
- Location: Cambridge
I believe it will default to analogue. If you select HDMI explicitly it will be discarded.Paul Webster wrote:So does the sound get discarded if firmware is told that the HDMI-connected device is video only (hdmi_drive=1)?